Connected insoles Walk active & Run

Before purchase

Digitsole connected insoles are insoles specially designed for sports enthusiasts. They are therefore suitable for all types of sneakers, however, it is important to remove the original insole from your shoes before inserting the Digitsole Insoles.

Available sizes range from 36 to 47.
Each insole includes three sizes in one. This implies that the sizes are :

EURUS MENUS WOMENUKMAXIMUM LENGTH
36-37-384-5-66-6.5-7.53.5-4-4.525 cm
39-40-417-7.5-88.5-9-105.5-6.5-7.527 cm
42-43-448.5-9.5-1010.5-118-9-9.529 cm
45-46-4711-12-1310-11-1231 cm

We recommend that you buy the model that matches your actual shoe size. Each model is designed to fit three sizes. You can cut your insoles to fit your actual size. If you are a size 40, you must buy the 39/40/41 model and cut the soles to fit your shoes.

You can resize your insoles by cutting them with a pair of scissors, using pre-cut lines.

In order for your phone to connect to the insoles, it must have an operating system iOS 11 or Android 6.0 or higher.

You can find these information in the settings of your phone.

In the box you will find your pair of Digitsole® connected insoles:

  • a USB cable / dual mini USB ports to recharge them
  • a user manual.

Our insoles were developed with chiropodists and biomechanics to ensure maximum comfort. However, because their shape is standardized, they cannot replace your insoles.

 

Overlaying the two pairs of insoles may cause your foot to be too compressed in the shoe. We offer you the option of alternating between orthopedic insoles to correct your feet posture and Digitsole® connected insoles to analyze your running and walking.

The Digitsole® connected insoles come with a 2-year warranty subject to our conditions of use.

Please refer to our T&Cs on our website for more information.

Digitsole Run application is compatible with Strava.

Configuration / Charge the insoles

The “Digitsole Run” and “Digitsole Walk Active” applications are free and compatible with iOS (minimum 11 and iPhone 4S) Android (minimum 6.0) mobile devices.

To create your account, simply enter your personal information (gender, height, weight and size) and your email address or phone number.

You will then receive an SMS code that you just have to input in the application or a link by email that you will have to confirm from your cell phone.

Once your account is created, the application will offer you to scan the QR Code.

For this step, it is required to authorize the application to access your phone’s location and your camera and to activate your Bluetooth. Once the QR Code has been scanned and your insoles connected to the application, you will be ready to start an activity.

Note: After this step, the application may offer to update the insoles. It is recommended that you do so to benefit from the latest improvements.

Once your insoles are connected to the application, on the main page of the application, click on to start an activity.

You can choose to :

  • Set a distance goal,
  • Set a time goal,
  • Set no goal,
  • Running without a phone

Once this step has been completed, click on .

Go to “menu”, then to “my profile” and finally click on “edit my profile” you will be able to change all your personal information.

Before the first use, it is essential to fully charge your insoles. To do so, connect your insoles to a proper charger using the included cable in your box. Your insoles are being charged when the red LED lights up. Once your insoles are fully charged, the red indicator light goes off, you can then unplug your insoles.

Please note: Charging on a PC will be much slower than on the mains.

My insoles

Your insoles are charging when the red light is on.

Once your insoles are fully charged, the red indicator lights will turn off.

The charging time of the insoles is about 2h30 on mains powered.

Your insoles have :

  • Up to 40 days of use based on 3 hours of activity per week
  • Up to 7 days of use based on 4 hours of activity per day
  • Up to 7 hours of use for continuous activity

If you don’t see a light at the charging port on the insoles and you can’t connect to the application, try changing the charging cable. For faster charging, it is not recommended to charge the insoles via a USB port.

Make sure the insoles are charged, unplugged them from the USB cable and not in standby mode (to make sure, shake the insoles to wake them up). You can also plug them in for 3 seconds and then unplug them.

Also make sure that your phone’s Bluetooth and location are turned on.

Note: Your insoles can’t be connected to both applications at the same time. It is necessary to close one application to be connected to the second one.

Make sure the insoles are charged, unplugged them from the USB cable and that they are not in standby mode (to make sure, shake the insoles to wake them up). You can also plug and unplug the insoles.

Also make sure that your phone’s Bluetooth and location are turned on.

Assurez-vous également que votre Bluetooth et la localisation de votre téléphone soient activés.

Make sure the insoles are charged, unplugged from the USB cable and that they are not in standby mode (to make sure, shake the insoles to reactivate them). You can also plug and unplug the insoles.

Also make sure that your phone’s Bluetooth and location are turned on.

NoteYour insoles can’t be connected to both applications at the same time. It is necessary to close one application to be connected to the second one.

For faster charging, we recommend that you connect the insoles directly to a power outlet via a charger.

To find out the battery level of your insoles, go to menu, then select “My account” and “My insoles”.

Your insoles must be unplugged.

If there is no activity in progress, your insoles turn off after 5 minutes of inactivity.

Insoles have five hours of recording time.

Do not put them in the washing machine.
You can clean your insoles with a damp cloth and soap, your insoles are splash-resistant (IPS6 certified).
Do not use any other cleaning agents, 
Then let them dry at room temperature.
Do not place them on a hot surface or radiator.

 

 

LED off:

  • The insoles are in standby mode.
  • The insoles have run out of battery power. 
  • If the insoles are connected, LED off means that the soles are fully charged.

LED on:
The insoles are charging and are not fully charged.

LED flashing:
The insoles are paired or are ready to be paired with your phone.

The light intensity of the LEDs located near the usb connector of the Smart Insoles may be low. We advise you to check it in a dark place.

My activities

Once your insoles are connected to the application, on the main page of the application, click on to start an activity.

You can choose to :

  • Set a distance goal,
  • Set a time goal,
  • Set no goal,
  • Running without a phone

Once this step has been completed, click .

Once your activity has started, you can pause it by clicking on To resume your activity, just click on .

To stop your activity, click on  , then click on .

From the “My walks” or “My runs“ page accessible from the Menu, you can, by clicking on the logo rename your activity, add comments and photos.

To delete an activity, there are two options:

  • You can directly delete the activity thanks to the “Delete activity” button located at the end of the biomechanical analysis of the activity.


  • You can also delete an activity directly from the history of your  walks, by swiping your activity to the left to access the “Delete” button.


On the main page of the application, click on . When choosing your goal or running mode: choose Run without phone. Once you have done this, click on .

There are two ways to activate audio notifications:
– You can activate them directly through the “My account” menu and then “Audio settings”.
– You can also activate them by clicking on the logo  on the home page of the application

Once the notifications are activated, you can choose the recurrence of the parameter announcements in time or distance. Then, by clicking on “Settings”, you will be able to choose the parameters you want the audio notifications to announce:
– Speed
– Time
– Distance
– Cadence
– Pace
– Stride length

We recommend a minimum activity duration of five minutes.

We advise you to run at least 7 km/h.

We recommend that you do not use your smart insoles on a treadmill. The results will not be optimal.

My results – Digitsole Run & Digitsole Walk Active

Parameters

Digitsole Run

Digitsole Walk Active

Duration of activity

X

X

Average and maximum speed

X

X

Maximum time per kilometer

X

 

Distance covered

X

X

Calories burned

X

X

Number of steps (walking)

X

X

Number of steps (running)

X

 

Stride Quality Index

X

X

Stride Quality Index (Injury risk)

X

 

Average and maximum pace

X

X

Average step length

X

X

Average stride length for each feet

 

X

Contact time for each feet

X

 

Strike type (Heel, toe, or side-feet)

X

 

Pronation/Supination

X

X

Impact force for each feet

X

 

Balance

X

X

Time – distance analysis

X

 

Ground control quality for each feet

 

X

Ground prolpulsion quality for each foot

 

X

Segment analysis

X

X

 

The pace is the number of steps per minute achieved during your running phases.

The flight time refers to the time during which the foot is not in contact with the ground.

Contact time is the time the foot is in contact with the ground.

The step length refers to the distance between two consecutive strides.

The stride length refers to the distance between two consecutive strides of the same foot.

In short, a stride is twice the step length.

The angle of pronation / supination is the angle defined between the foot and the ground.

The strike style refers to the part of your foot with which you touch the ground first during your run.

Support request

You didn’t find the answer to your question on our documentation? Open a support ticket and our dedicated teams will be happy to assist you in the use of your product: